Skip to main content

Federal PFAS Maximum Contaminant Levels

NR 809 SAFE DRINKING WATER STANDARDS UPDATE

Federal PFAS Maximum Contaminant Levels (MCLs) for drinking water

The state's safe drinking water code NR 809 will be revised to include federal PFAS maximum contaminant levels (MCLs), technical edits and updates to lead and copper.

The final federal PFAS standards are as follows:

ChemicalMaximum contaminant levels goals (MCLG)Maximum contaminant level (MCL)
PFOA0 ppt4.0 ppt
PFOS0 ppt4.0 ppt
PFHxS10 ppt10 ppt
HFPO-DA (GenX chemicals)10 ppt10 ppt
PFNA10 ppt10 ppt
Mixture of two or more: PFHxS, PFNA, HFPO-DA and PFBS Hazard index of 1Hazard index of 1

Rulemaking timeline

Federal PFAS MCLs Rulemaking Timeline

Summer 2024

Fall 2024

Winter 2024/2025

  • Begin rule drafting
  • Stakeholder/Public meetings
We are here

Spring/Summer 2025

  • Preparation of proposed rule
  • Solicitation of information for economic impact analysis (EIA)

Fall 2025

  • Public hearing on the proposed rule

Winter 2025/2026

  • NRB meeting for adoption
  • Rule approved by the governor
  • Legislative review

Spring 2026

  • Rule signed by DNR Secretary

Fall 2026

  • Rule becomes effective

Rulemaking procedures

Rule change process, public input and timeline

The DNR creates and revises administrative rules to implement statutes enacted by the Wisconsin State Legislature [exit DNR]. Administrative rules have the full force and effect of law.

Rulemaking is an extensive process and there are many internal steps [PDF] that the DNR and the NRB must follow during a rulemaking effort. Public participation is a critical component of agency rulemaking. There are numerous opportunities to participate in the DNR rulemaking process. For permanent rules, the entire process generally takes about 31 months from initiation to effective date of rule revisions.

Stakeholder meetings

Public Meeting: NR 809 Safe Drinking Water Revisions (PFAS, CCR And Technical Edits)

The Wisconsin Department of Natural Resources (DNR) is sharing information on proposed rules related to chapter NR 809 PFAS rule revisions, CCR revisions and some technical edits. The scope statements were recently approved. Details will be provided on the economic impact analysis, requirements and additional technical edits to the chapter. You may obtain more information about the status and proposed rules on the DNR's NR 809 Drinking Water Standards Update webpage.

An information-sharing meeting will be held in-person and online on March 4, 2025 from 10 a.m. - noon.

Attend online: Join via Zoom

You will need to pre-register at the Zoom link above.

Meeting ID: 885 3143 1405

Chicago call in number: (312) 626-6799

Attend in-person:

Department of Natural Resources
101 S. Webster St., Madison, WI 53707-7921
Room G09

In-person attendees should RSVP to ElaineC.Meier@wisconsin.gov.

Resources

Resources

Wisconsin Department of Health Services - PFAS Chemical Information

PFAS are a group of human-made chemicals that have been used since the 1950s; PFOA and PFOS are the most widely produced and studied of these chemicals. These compounds may still be found in everyday consumer products, such as some grease-resistant paper, nonstick cookware, stain-resistant fabrics, cleaning products and other personal care products, like shampoo and nail polish.

EPA - PFAS Explained

PFAS are widely used, long-lasting chemicals which break down very slowly over time. Because of their widespread use and their persistence in the environment, many PFAS are found in the blood of people and animals all over the world and are present at low levels in a variety of food products and in the environment.

They can be present in our water, soil, air and food as well as in materials found in our homes or workplaces, including:

  • Drinking water - in public drinking water systems and private drinking water wells.
  • Soil and water at or near waste sites - at landfills, disposal sites and hazardous waste sites such as those that fall under the federal Superfund and Resource Conservation and Recovery Act programs.
  • Fire extinguishing foam - in aqueous film-forming foams used to extinguish flammable liquid-based fires. Such foams are used in training and emergency response events at airports, shipyards, military bases, firefighting training facilities, chemical plants and refineries.
  • Manufacturing or chemical production facilities that produce or use PFAS - for example, at chrome plating, electronics and certain textile and paper manufacturers.
  • Food - for example, fish caught from water contaminated by PFAS and dairy products from livestock exposed to PFAS.
  • Food packaging - for example, in grease-resistant paper, fast food containers/wrappers, microwave popcorn bags, pizza boxes and candy wrappers.
  • Household products and dust - for example, in stain and water-repellent used on carpets, upholstery, clothing and other fabrics; cleaning products; non-stick cookware; paints, varnishes and sealants.
  • Personal care products - for example, in certain shampoo, dental floss and cosmetics.
  • Biosolids - for example, fertilizer from wastewater treatment plants used on agricultural lands can affect ground and surface water and animals that graze on the land.

EPA - Human Health and Environmental Risks of PFAS

Wisconsin Certified PFAS Labs

The following list of labs is certified by the State of Wisconsin to analyze PFAS compounds for the requirements of this new regulation: Labs approved for testing.

EPA Approved PFAS Labs

The following list of labs is approved by the EPA to analyze PFAS compounds using the EPA's testing methods. These labs are acceptable to use for the requirements of this new regulation: Labs approved for testing.